Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
1～10 item / All 10 items
Adsorbs onto activated carbon, neutralizing unpleasant odors and VOCs.
The "activated carbon adsorption device" uses activated carbon to neutralize unpleasant odors and VOCs. 【Specifications】 ○ Power source: Electric / High-pressure air ○ Inlet gas temperature: Below 40°C ○ Treatment efficiency: Over 90% Please contact us for more details.
Activated carbon can be regenerated and reused! Compatible with cartridge-type small devices to large devices.
The "Activated Carbon Adsorption Device" is suitable for low-concentration gases and uses activated carbon to neutralize odors and VOCs. Activated carbon can be regenerated and reused. The device is simple and easy to operate. Additionally, it operates using electricity or high-pressure air, and the exhaust gas inlet temperature is below 40°C, accommodating both cartridge-type small devices and large devices. 【Features】 ■ Suitable for low-concentration gases ■ Activated carbon can be regenerated and reused ■ Simple device with easy operation ■ Compatible with corrosive gases ■ Applicable from cartridge-type small devices to large devices *For more details, please refer to the PDF document or feel free to contact us.
Organic solvents, alkalis, acids, odors, etc. will be adsorbed and removed using activated carbon.
Introducing the activated carbon adsorption devices MDF120 / MDF150 / MDF180. They adsorb and remove organic solvents, alkalis, acids, odors, and more using activated carbon. The activated carbon adsorbent is selected based on the target gas. For more details, please contact us.
Removes chemical substances from treated water! A long-life activated carbon adsorption device that is also recyclable.
The "Reach Filter" is an activated carbon adsorption device used to remove chemical substances contained in treated water from manufacturing water, factory wastewater, drinking water, and sewage treatment. To demonstrate adsorption performance, the entire activated carbon in the adsorption tank is fluidized and mixed with cleaning water and air bubbles, allowing for the washing and removal of SS (suspended solids) adhering to the activated carbon, which can then be discharged outside the adsorption tank. This device can maintain the adsorption performance of activated carbon for a long time, significantly reducing running costs. It can also be utilized as regenerated carbon, making it an environmentally friendly device that promotes effective resource use. 【Features】 ■ Improved adsorption efficiency and reuse of activated carbon ■ Reduced running costs and treatment costs for activated carbon ■ Increased work efficiency ■ Decreased ancillary equipment and maintenance management for the device *For more details, please refer to the PDF materials or feel free to contact us.
Extend the lifespan of activated carbon with double washing using microbubbles and water. Significantly reduce running costs by minimizing replacement frequency. Contribute to the extension of activated carbon life!
The activated carbon adsorption device "Reach Filter" resolves the issue of activated carbon solidification due to inadequate cleaning through dual cleaning with washing water and microbubbles, enabling long-term maintenance of activated carbon performance. By reducing the frequency of activated carbon replacement, it significantly lowers running costs such as filter replacement expenses and industrial waste disposal fees. It is capable of handling a wide range of water treatment applications, from manufacturing water to factory wastewater, as well as drinking and sewage water. 【Features】 ■ Contributes to CO2 reduction ■ Extends the lifespan of activated carbon replacements ■ There are cases where the lifespan of activated carbon used in food company clean water treatment facilities has been tripled (from 1 year to 3 years) ■ Unique cleaning allows effective utilization of micro and sub-micro pores inside the activated carbon ■ Compact design considering installation space ★ You can view product materials with cost reduction case studies and a collection of installation examples of sand filtration systems that include this product by downloading the PDF. (For more detailed information about cost reduction case studies, please contact us.) *If you submit the "model selection sheet" included in the product materials, we will propose specifications that meet your requirements.
Adsorption method suitable for high-level processing!
Calcium-based coagulation and sedimentation treatment is common, but our company offers a fluoride treatment technology using adsorption methods. With the adsorption method, it is possible to efficiently treat low concentrations by passing liquid through a tower filled with fluoride adsorbent. The adsorbent can be reused after regeneration, leading to reduced running costs, and we use "READ-F(HG)." 【Features】 ■ Efficient for concentrations of around 20 mg/L ■ Capable of treating down to environmental standards (0.8 mg/L) ■ Strong against concentration changes ■ Relatively easy to manage operations *For more details, please download the PDF or feel free to contact us.
Remove bacteria generated inside the activated carbon tower! Since it is indirectly heated with a heat exchanger, there is no need to worry about rust or dirt in the piping.
The "Activated Carbon Adsorption Device" is a product with a sterilization function through heating. In the case of steam sterilization, rust and dirt tend to accumulate on the steam piping, but since a heat exchanger is used, there is no need to worry about rust or dirt in the steam piping. It can be safely used for drinking water and food processing. Additionally, the heat sterilization using steam prevents the proliferation of bacteria. For product specifications, please contact us. 【Features】 ■ Heat sterilization type ■ Indirect heating, so no worries about rust or dirt ■ Prevention of bacterial proliferation ■ Removal of organic matter, odors, color, and trihalomethanes *For more details, please refer to the PDF document or feel free to contact us.
For the removal of color, suspended solids, odor, and residual chlorine! Water management tailored to water quality and purpose is possible.
The "Activated Carbon Adsorption Device" is a device that uses activated carbon capable of addressing a wide range of fields for adsorption. It is effective for the removal of suspended substances, color, COD, deodorization, decolorization, and residual chlorine in raw water. It removes color, odor, and residual chlorine found in well water, river water, industrial water, etc. Please consult us for wastewater treatment. 【Features】 ■ Adsorption using activated carbon that can address a wide range of fields ■ Suitable for secondary treatment after filtration ■ Diagnosis of the condition of the device and deterioration of the filtration material, with recommendations for the timing of activated carbon replacement ■ Support to maintain stable quality is available *For more details, please refer to the PDF materials or feel free to contact us.
Adsorption and removal of substances like fluorine and boron using chelating resin! Regeneration of adsorption capacity is possible.
We would like to introduce our "Heavy Metal Chelating Resin System." When treating wastewater from factories for discharge into rivers or sewers, if trace amounts of fluoride or boron exceed discharge standards and are difficult to remove using conventional methods, it is possible to adsorb and remove fluoride and boron using chelating resin. Once the adsorption capacity is lost, it can be reused repeatedly through chemical regeneration, achieving high cost performance. 【Features】 ■ Ensures discharge standards for rivers and sewers for "fluoride, boron," which are difficult to treat with conventional methods ■ Reusable ■ Achieves high cost performance *For more details, please refer to the PDF document or feel free to contact us.
Solves the solidification problem of activated carbon and enables long-term maintenance of adsorption performance. High value for use in applications such as sewage treatment and final disposal sites, where replacement frequency is high. *Case study collection available.
The activated carbon adsorption device "Reach Filter" resolves the issue of activated carbon solidification caused by inadequate cleaning through dual cleaning with washing water and air bubbles, enabling long-term maintenance of activated carbon performance. It is suitable for a wide range of water treatment applications, from manufacturing water to factory wastewater, and drinking water to sewage. By reducing the frequency of activated carbon replacement, it contributes to lower running costs and CO2 reduction. Additionally, by using it in conjunction with our "sand filtration system," it is possible to supply treated water that meets drinking water quality standards. 【Features】 ■ Reduction of costs and labor through decreased activated carbon replacement work ■ Prevention of activated carbon solidification due to inadequate cleaning ■ Effective utilization of micro and sub-micro pores inside the activated carbon through unique cleaning ■ Compact design * We are currently offering materials that introduce the cleaning process and representative water treatment processes (sewage treatment facilities / final disposal sites) with diagrams! For more details, please check the download button. Feel free to contact us with any inquiries.
